Floor Mounted Eye Wash Station

Floor Mounted Eye Wash Station is specially designed water fountains that enable easy access to eye washing.They are created with efficiency in mind and direct a soft flow of water straight to the eyes, making it simple for injured individuals to completely rinse their eyes with minimal effort required.They can provide irrigation when dust, irritants, or chemicals get in the eyes, and it’s recommended that they are used for 15 minutes to properly clear the affected area of contaminants or until suitable medical help arrives.

Description

Product Specification

Materials:SS304

Surface finishing:Sanbed

Function:eye and face washing

Switching ball valve: two-piece ball valve

Pipe diameter: 42mm

Nominal pressure: 1.0Mpa

Working pressure: 0.2~0.4Mpa

Test pressure: 1.5Mpa

Working environment temperature: 0°C~40°C

Eye wash/face wash water flow: ≥11.4 L/min

Flow of eye wash: ≥1.5 L/min

Eye wash bowl: 300mm straight edge design, gather water, prevent splash

Dust cover: integrated design of main body, not easy to lose

Inner size:Rc3/4” female

Outlet size:Rc1” female

Inlet height: 950mm

Outlet height: 100mm

How to use an Floor Mounted Eye Wash Station in the event of an accident?

When trying to minimise a chemical eye injury, speed is of the essence. The longer the eye is in contact with the chemical, the more damage it can do. For maximum efficiency, install an emergency eyewash station as close to the work area as possible. Train every worker fully on how to operate it, ensuring full comprehension.

In the event of chemicals getting into your eyes, you should:

Go to the emergency eyewash station immediately

Don’t panic – simply signal or shout for assistance. Getting your colleagues attention means that they can help you to operate the eyewash and clean your eyes or call the emergency services.

Push the lever to activate the unit

Flush out the eyes for a minimum of 15 minutes. If you have clean hands, hold your eyes open as wide as possible to let water reach all areas around the eye. If your hands are not clean, a colleague can help you.

Remove contact lenses

You shouldn’t try to remove any contact lenses you are wearing right away, instead, wait until you’ve already washed your eyes out for 15 minutes and then remove them and continue washing.

Keep flushing

Once activated, the unit will stay on for ease of use. Roll your eyes around so that water can reach all areas around the eye.

After flushing

Seek immediate medical help after the exposure and initial eye wash to follow up on treating your eyes.

Related Products

Explore our full range of laboratory solutions—including Lab Fittings, Water Taps, Spill Pallets, Sinks, Fume Extractors, and Pegboards—designed to enhance safety, efficiency, and long-term performance across modern laboratory environments.

The double way lab water tap flushing and cleaning, as well as easy filling of a wide range of glassware and containers.The two-way water outlet design ensures a stable and uniform water flow, meeting diverse experimental needs, providing reliable guarantee for your experimental work. This product is very suitable for schools, hospitals, scientific research institutions and other places, and is an important tool for maintaining laboratory cleanliness and efficiency.

Double Way Lab Water Tap

The laboratory mixer water tap is a compact laboratory mixer tap that combines hot and cold water in one body.A tall gooseneck spout provides generous clearance above the sink, while two color-coded handles offer precise control of flow and temperature. The swing spout can be rotated to cover a wider washing area, making it ideal for busy lab benches.

Laboratory Mixer Water Tap

The Wall Mounted Eye Wash Station is an effective safety protection device that can quickly minimize the harm when toxic and harmful substances (such as chemical liquids, etc.) splash onto the body, face or eyes of workers or when a fire causes the clothes of workers to catch fire. But wall mounted eye wash are only used in emergency situations to temporarily slow down the further harm of harmful substances to the body. Further handling and treatment should follow the guidance of a doctor.

Wall Mounted Eye Wash Station

Portable self-contained eye wash provides a self-contained emergency eye rinsing solution for areas where a fixed plumbed eyewash is not available. The integrated tank stores clean flushing fluid and delivers a gravity-fed rinse through dual spray outlets for quick first response to chemical splashes, dust, or debris. Designed for easy wall mounting and routine maintenance, it is ideal for laboratories, workshops, warehouses, and temporary or remote work sites.

Portable Self-contained Eye Wash

Latest Blog & Articles

April 07, 2026

How to Choose and Use an Emergency Eye Wash Station

Any workplace that uses chemicals with the potential to cause harm to human health should be prepared for the worst eventuality. Although chemical accidents are rare, but when toxic or harmful substances (such as chemical liquids) splash onto the body, face, eyes of the workers, or when a fire causes the workers' clothes to catch fire, knowing how to use equipment such as an emergency eye wash station to temporarily reduce the further damage to the body caused by the harmful substances.

April 07, 2026

Why Regular Emergency Shower and Eyewash Inspections Are Important?

In the event that anyone within your workspace suffers a chemical splash to their eyes, every second counts. Emergency Shower and Eyewash is there to provide immediate first aid following a chemical splash to the eye, working to limit the long-term damage as much as possible.

April 07, 2026

What Kind Of Equipment Should Be Used In School Laboratories?

When learning science in school, it is crucial to provide students and teachers with the right scientific equipment and an environment conducive to science learning. Creating a safe and high-quality environment in school laboratories is crucial to ensure that students can acquire knowledge through both experimental learning and book learning.