Floor Mounted Emergency Shower

Floor mounted emergency shower is essential in environments such as laboratories, factories, and chemical plants where workers may be exposed to hazardous chemicals. They provide immediate decontamination by flushing chemicals off the body, reducing the risk of burns, irritation, or long-term injury, and help control accidents by preventing chemical spread or escalation of harm. They are often used in combination with eyewash stations to ensure comprehensive protection.

Description

Product Specification

Material: Stainless Steel 304

Surface finishing: Polished or glossy epoxy coated

Usage: shower ( optional hand-held eye wash )

Shower & eye wash switch: two-piece ball valve

Shower head: spinning-formed with curled rim, diameter 250 mm

Pipe diameter: 38 mm

Nominal pressure: 1.0 MPa

Working pressure: 0.2~0.4 MPa

Testing pressure: 1.5 MPa

Temperature requirement on working environment: 0°C~40°C

Flow rate of body shower: ≥76 L/min

Inlet thread: G 1"

Inlet height ( from above the floor ): 1190 mm

Water pattern coverage: at the height of 1520 mm above floor, the water pattern covers ,a circular area of at least 510 mm in diameter

Product Installation

Installation:Floor mounted emergency shower should be installed in a highly visible location with easy access from at lease three directions, the position should be reachable within 10 seconds of any hazardous area. The general area should be kept clear at all times with clear access and no obstructions which could hinder access if vision is impaired. Suitable flooring should be considered to prevent a slip hazard along with suitable drainage or a procedure to deal with spillage. The valve and flow should remain open until manually turned off. It should be also ensured that the water supply cannot be turned off or interrupted in the supply pipework.

Product Maintenance

1. Regular Startup Checks

Activate the emergency flushing device at least once a week to check the filter for impurities, rust, or blockage, and ensure the water outlet is functioning properly.

2. Monthly Maintenance

Conduct comprehensive inspection and maintenance of the device every month to find and eliminate potential faults in time to ensure that the equipment is in good working condition.

3. Annual Testing

A comprehensive annual inspection is conducted annually to evaluate the overall performance and safety of the equipment to ensure that the emergency shower equipment can be used normally.

4. Inspection Record Management

After each inspection and maintenance, be sure to fill in the relevant records on the registration card, which needs to be placed near the emergency flushing device for easy access and management at any time.

Related Products

Explore our full range of laboratory solutions—including Lab Fittings, Water Taps, Spill Pallets, Sinks, Fume Extractors, and Pegboards—designed to enhance safety, efficiency, and long-term performance across modern laboratory environments.

PP material lab drip rack is widely used in hospital laboratories, school laboratories, chemical production workshops and other places. In hospital laboratories, it is used to store and drain test tubes, reagent bottles, etc. In school chemistry laboratories, students can place containers after reactions on the dripping rack to drain before proceeding to the next step. In industrial production, it can be used for temporary storage and draining of intermediate products.

PP Material Lab Drip Rack

Stainless steel sinks are made of durable, load-bearing, light-resistant, heat-resistant, and rust-resistant stainless steel. They are easy to clean and less susceptible to bacterial growth.

Runwangda's stainless steel sinks are made of 304 stainless steel, which is more corrosion-resistant and rust-resistant than 202 and 201 stainless steel.

Stainless Steel Lab Sink

The Stainless Steel Eye Wash with Treadle Operation is suitable for use in laboratories, chemical handling areas, and industrial sites. The integrated eyewash bowl features dual jets to provide a gentle, balanced rinse for the eyes, while the foot pedal activation allows for hands-free operation and faster response in emergency situations. This freestanding, floor-mounted structure is ideal for installation near hazardous points to help minimize injuries from chemical splashes and contamination accidents.

Stainless Steel Eye Wash with Treadle Operated

Floor Mounted Eye Wash Station is specially designed water fountains that enable easy access to eye washing.They are created with efficiency in mind and direct a soft flow of water straight to the eyes, making it simple for injured individuals to completely rinse their eyes with minimal effort required.They can provide irrigation when dust, irritants, or chemicals get in the eyes, and it’s recommended that they are used for 15 minutes to properly clear the affected area of contaminants or until suitable medical help arrives.

Floor Mounted Eye Wash Station

Latest Blog & Articles

April 07, 2026

How to Choose and Use an Emergency Eye Wash Station

Any workplace that uses chemicals with the potential to cause harm to human health should be prepared for the worst eventuality. Although chemical accidents are rare, but when toxic or harmful substances (such as chemical liquids) splash onto the body, face, eyes of the workers, or when a fire causes the workers' clothes to catch fire, knowing how to use equipment such as an emergency eye wash station to temporarily reduce the further damage to the body caused by the harmful substances.

April 07, 2026

Why Regular Emergency Shower and Eyewash Inspections Are Important?

In the event that anyone within your workspace suffers a chemical splash to their eyes, every second counts. Emergency Shower and Eyewash is there to provide immediate first aid following a chemical splash to the eye, working to limit the long-term damage as much as possible.

April 07, 2026

What Kind Of Equipment Should Be Used In School Laboratories?

When learning science in school, it is crucial to provide students and teachers with the right scientific equipment and an environment conducive to science learning. Creating a safe and high-quality environment in school laboratories is crucial to ensure that students can acquire knowledge through both experimental learning and book learning.